HB - 300.

The standard configuration

A feeding machine, a slicer, a host machine, die cutting board thickness of two pieces, die cutting board two pieces, hardware die device

Optional configuration

1. Laminating roller device; 2. Add laminating protective film device between die base and lapo roller; 3. Adding material collection device on waste collection rack; 4. Add feeding device to waste collector; 5. Pull a wave

Drum coating; 6. Press wheel is changed to press rubber roller; 7. Add thimble waste discharging device; 8. Change the clamping wheel to the clamping disc; 9. Multiple double-sided adhesive laminating fixtures; 10. The secondary electricity

Eye-tracking device; 11. Add feeding rod and receiving rod from the middle of the mold seat; 12. Electrostatic device removal; 13. Bronzing device

The standard configuration

Feeding - suction - joint/framed glue - die cutting/hot stamping/hardware mould device - upper and lower joint/suction/discharge - die cutting mould device of hardware - waste - winding/cut

The characteristics of

1. Suitable for laminating and punching of various winding and laminating materials.

2. Using the computer servo CNC system to pull and feed materials, it can be used for full break, half break punching type, exhaust, high precision, low noise, fast speed, with anti-scratch function.

3. It can be used for secondary die cutting, which is widely used in electronic industry and printing industry.

4. The function of secondary positioning die cutting can be customized according to customer requirements. At the same time, the machine can be used for multiple full break, half break waste elimination, which can be obtained in the production of backlight and dustproof network

Widely used.