Hb-350 standard configuration of a feeder, a slicer, a host, die cutting board thickness of two pieces, die cutting board two pieces, hardware die device

Optional configuration

1. Laminating roller device; 2. Add laminating protective film device between die base and lapo roller; 3. Adding material collection device on waste collection rack; 4. Add feeding device to waste collector;

5. Roller coating; 6. Press wheel is changed to press rubber roller; 7. Add thimble waste discharging device; 8. Change the clamping wheel to the clamping disc; 9. Multiple double-sided adhesive laminating fixtures;

10. Secondary electronic eye tracking device; 11. Add feeding rod and receiving rod from the middle of the mold seat; 12. Electrostatic device removal; 13. Bronzing device

The standard configuration

Feeding - suction - joint/framed glue - die cutting/hot stamping/hardware mould device - upper and lower joint/suction/discharge - die cutting mould device of hardware - waste - winding/cut

Features 1. Suitable for laminating and punching of various winding and laminating materials. 2. Use the computer servo CNC system to pull and feed the material, which can be used for full break, half break impulse type,

Waste removal, high precision, low noise, fast speed, anti - scratch function. 3. It can be used for secondary die cutting, which is widely used in electronic industry and printing industry.

4. The secondary positioning die cutting function can be customized according to customer requirements, and the machine can be used for multiple full break, half break exhaust, which is widely used in the production of backlight and dustproof network.